Grid Handbook is a buying and selling supervisor designed to work with a grid of orders. Can work concurrently with 20 order grids, and every grid can have particular person settings. The applying creates a grid of orders mechanically for every master-order.
Grasp-order is an order opened utilizing the buttons on the panel, or an order opened by one other professional (offered that Magic quantity=0). A grid of orders is connected to this order. The order grid exists so long as the master-order exists; when the master-order is closed, the order grid will likely be closed mechanically.
Settings
To start out working with the appliance, go to the Settings tab and set the order grid parameters. These settings are utilized when creating a brand new order grid. Sooner or later, an already open mesh can solely be edited from the MG tab. This fashion you’ll be able to set particular person parameters for every of the 20 grids.
Grid parameter settings.
Grid kind
Order grid kind.
Restrict — the grid is constructed from BuyLimit or SellLimit orders, and is directed in the direction of the lack of the primary order. This sort is utilized in methods with averaging losses.
Cease — the grid is constructed from BuyStop or SellStop orders, and is directed in the direction of the revenue of the primary order. This sort is utilized in methods that improve income.
Step kind
Technique for calculating the order grid step.
- Step dimension (Fastened technique).
- Multiplier for rising steps (Fastened technique).
- Timeframe for the ATR indicator (ATR technique).
- Interval for the ATR indicator (ATR technique).
- Multiplier for step (ATR technique).
- Minimal step (ATR technique).
Step kind: ATR – the step dimension is dynamic and is dependent upon the studying of the ATR indicator: Step=ATR*Coefficient. The step is recalculated and the grid is rebuilt as every grid stage is triggered. To manage the minimal step dimension, the Min. step (5) parameter is offered. If the calculated step is lower than the Min. step worth, then the utility will take the Min. step worth as a step.
Step kind: Fastened — the step dimension is mounted. Step one is the same as the Grid step parameter (1), subsequent steps: Step=Earlier step*Step mult. (2).
Num. step
The variety of steps within the order grid.
Take revenue and cease loss settings for the order grid. Trailing cease and Breakeven operate settings.
TP kind и Take revenue
Settings for Take Revenue of the order grid.
TP kind for Restrict grid:
Off — Take revenue of every grid order is ready to the Take revenue (1) distance from the Grasp-order. As soon as the take revenue is ready, the appliance doesn’t management its location, and the person can transfer the take revenue of every order to any worth.
Aggressive — The take revenue of every grid order is ready to the Take revenue (1) distance from the general breakeven stage of open grid positions. The take revenue location of every grid order is managed by the appliance, and the person can’t transfer the take revenue orders.
Conservative — The take revenue of every grid order is ready at a calculated distance from the general break-even stage of open grid positions. The space is calculated in such a approach that when the grid of orders is closed by take revenue, the scale of the full revenue of the positions is the same as the revenue that the grasp place would have. The take revenue location of every grid order is managed by the appliance, and the person can’t transfer the take revenue of orders.
TP kind for Cease grid:
For the Cease grid, Take Revenue is ready to the Take revenue (1) distance from the final stage in the direction of revenue.
Auto — The situation of the take revenue of every grid order is managed by the appliance. If the place of the intense grid stage adjustments, the appliance will mechanically transfer the take income of orders to the Take revenue distance. The person can’t transfer the take revenue of orders.
Off — As soon as the take revenue is ready, the appliance doesn’t management its location, and the person can transfer the take revenue of every order to any worth.
Cease loss
Cease lack of all grid orders is ready on the identical stage:
- For Purchase grid — cease loss is ready from the final decrease stage of the grid, at a distance of Cease loss (1).
- For Promote grid — cease loss is ready from the final higher stage of the grid, at a distance of Cease loss (1).
Breakeven operate
The Breakeven operate is designed to mechanically transfer the cease lack of grid positions to the grid breakeven stage.
The applying will transfer the cease lack of positions to the grid breakeven stage when the present worth reaches the BreakEven Distance (1) distance, delayed from the grid breakeven stage. To offset the cease lack of positions from the breakeven of the grid, set the offset within the BreakEven Revenue (2) parameter.
Trailing cease operate
The trailing cease operate strikes the cease lack of grid positions following the present worth, with a Trailing Cease (2) distance.
The trailing cease operate will start to work when the present worth reaches the Trailing Begin (1)
To cut back the variety of order modifications, you’ll be able to improve the trailing cease step (3). For instance, when you set the step to 10, the operate will transfer cease losses in steps of 10 factors, thus lowering the variety of modifications by 10 instances.
Lot settings of the order grid.
Grasp lot
To calculate the lot of an order opened utilizing the buttons on the TR tab, you’ll be able to set one of many following choices:
Fastened – orders opened utilizing the buttons can have the lot specified within the Lot enter subject (1).
Auto – orders opened utilizing buttons can have so much calculated by the appliance. The lot is calculated utilizing the next formulation: Lot = Present Stability/worth within the subject (1) * 0.01.
For instance:
Lot calculation technique – Auto,
Account steadiness – $50,000,
Worth within the subject (1) – $10,000,
Lot = 50123/10000*0 .01=0.05.
Grid lot
Lot begin — lot for the primary order of the grid (0-off).
Calc. kind — technique for calculating the order grid lot:
Geometric — order lot = earlier lot × Lot step.
Arithmetic — order lot = earlier lot + Lot step.
Begin step – variety of the order grid step from which the lot will start to extend (0-off).
Max lot – most grid lot (0-off).
TR tab
The tab is meant for opening and shutting orders.
- Buttons for opening Purchase and Promote orders.
- Buttons for closing and deleting all Purchase or Promote positions and orders. Positions and orders are deleted solely from the present instrument which have the identical magic quantity as the appliance.
- Buttons for displaying line on the chart with a button for opening a pending order (4).
- A line with a button for opening a pending order is displayed by urgent a button from the group (3).
TR tab: open a place and order
To open a Purchase or Promote place, click on the button from group (1).
To open a pending order, click on the button from group (2), transfer the road that seems on the chart to the required worth and click on the Open (4) button.
To ensure that the appliance to mechanically open Purchase or Promote positions, click on the Begin Purchase or Begin Promote button (1). When Auto commerce is enabled, the appliance will open a place offered that the earlier place in the identical path is closed. Positions will likely be opened so long as Auto commerce is enabled..
To disable Auto commerce, press the Begin Purchase or Begin Promote (1) button once more, or set the utmost variety of positions (6) (when the utmost variety of positions is reached, Auto commerce will likely be disabled mechanically).
For Auto commerce you’ll be able to set further filters: Time vary (2,3)and worth vary (4 ,5), during which the appliance will open positions.
CL Tab
The tab is meant for closing orders and positions.
The Grid Shut subtab is meant for closing the order grid.
The applying can handle as much as 20 order grids. To kind them, every grid has its personal quantity, equivalent to the master-order ticket. Every grid order, apart from the master-order, has a remark with the variety of the grid to which it belongs. To shut the order grid, click on the button with the corresponding grid quantity.
- Present revenue of the order grid.
- Shut all order grid.
- Shut solely worthwhile positions belonging to the grid.
The All Shut subtab is meant for closing orders and positions when a specified quantity of revenue or loss is reached. This operate works towards all orders and positions on the account, no matter who opened them.
- Accounting for all orders and positions on the account:
Enabled – the appliance takes into consideration the revenue of all positions on the buying and selling account, and when a specified revenue or loss is reached, closes all orders and positions on the account.
Disabled – the appliance takes into consideration the revenue of positions solely on the present image, When a specified revenue or loss is reached, it closes all orders and positions solely on the present image. - Allow the operate of closing orders and positions based mostly on revenue *.
- Allow the operate of closing orders and positions upon reaching a loss*.
* The revenue and loss worth may be entered with a plus and minus signal. If you wish to enter a unfavourable quantity, you will need to put a minus register entrance of the quantity.
- Examples for revenue worth (2):
The present order revenue is $ 200, and also you need the utility to shut the orders if the revenue rises to $ 400. On this case, you enter 400 within the revenue subject, with out a minus signal.
The present order loss is $ -500, and also you need the utility to shut orders when the loss decreases to $ -300. On this case, you enter -300 within the revenue subject, that’s, with a minus signal. - Examples for the loss worth (3):
The present order revenue is $ 200, and also you need the utility to shut the orders if the revenue drops to $ 100. On this case, you enter 100 within the loss subject, with out a minus signal.
The present order revenue is $ 10, and also you need the utility to shut the orders when it reaches a $ -100 loss. On this case, you enter -100 within the loss subject, that’s, with a minus signal.
VG tab
The VG tab is designed to allow/disable the show of grid ranges. Ranges are displayed as traces, the colour and elegance of that are configured from the enter parameters.
- Present / cover the degrees of all grids.
- Present / cover the degrees of the desired grid.
MG tab
The MG tab is designed to handle present order grids.
- Buttons to go to establishing the order grid.
- Button to cease grid management.
To alter the parameters of the order grid, click on the button with its quantity (1).
The order grid settings are divided into three teams: Setting, Grid and Tp/Sl. All adjustments on this tab apply solely to the chosen order grid.
- The grid quantity.
- Grid kind (Restrict or Cease).
- Technique for calculating the step dimension (Fastened or ATR).
- Timeframe for the ATR indicator (ATR technique).
- Interval for the ATR indicator (ATR technique).
- Multiplier for the step (ATR technique).
- The minimal step (ATR technique).
- The variety of steps within the grid.
- Button to cease managing the order grid.
- Step dimension (Fastened technique).
- Multiplier for step improve (Fastened technique).
- Save the adjustments.
- Reset adjustments.
To avoid wasting adjustments, click on (11). To reset your adjustments earlier than the final saved state, click on (12).
To quickly cease monitoring the order grid, click on (9). When monitoring is stopped, all buying and selling operations for this grid of orders are stopped, which signifies that the utility is not going to modify the grid positions and won’t open new orders for it. To renew buying and selling, click on (9) once more.
If adjustments to the grid settings are made when buying and selling is stopped, the adjustments will solely take impact when buying and selling is resumed.
For extra details about the parameters of this tab, see the settings Tab: Grid.
- Fulfilled ranges.
- The chosen stage for adjustment.
- Buttons for scrolling the checklist.
- The extent chosen for configuration.
On this tab, you’ll be able to change the place of the extent and its lot.
change the worth of the grid stage
To alter the place of the grid stage, choose it within the checklist of orders. Transfer the flashing line that seems to the specified location and click on SAVE.
You’ll be able to solely change the extent place when Step kind — Fastened. When the Step kind — ATR place is ready, the step is calculated utilizing the Common True Vary indicator.
change the open grid stage lot
To alter the scale of a stage lot, double-click its cell and open the enter subject. Enter the required lot within the subject that seems and click on SAVE.
- Sort of take revenue calculation (Aggressive or Conservative, just for the Restrict grid kind).
- Take revenue for the grid of orders (in factors, 0 — off).
- Cease loss for the grid of orders (in factors, 0 — off).
- Breakeven distance (in factors, 0 — off).
- Revenue for the breakeven operate (in factors).
- Distance to start out the trailing cease (in factors).
- Trailing cease distance (in factors, 0 — off).
For extra details about the parameters of this tab, see the settings Tab: Tp/Sl.
To avoid wasting the settings, click on SAVE.
Transferring the grid take revenue to the overall stage
This operate works solely when TP kind = Off , and is meant to set the full take revenue stage of all grid orders.
- Button for modifying orders. By clicking on this button, the take revenue of all orders will likely be moved to the desired stage.
- Cancel button.
- The value of the extent to which the take revenue will likely be moved.
- Revenue of grid positions on the present stage.
- Revenue of all grid orders on the present stage (all grid orders are taken into consideration, together with people who haven’t but been opened).
Enter parameters
- ===LOT ORDER===
- Lot calculation kind — technique for calculating the master-order lot (opened by buttons on the TR panel).
- Lot/$ — worth for Lot calculation kind.
- ===LOT GRID===
- Lot begin — lot dimension for the primary order within the grid (0 – off).
- Calculation begin step — variety of the extent from which the lot will start to extend (0 – off).
- Сalculation kind — technique for calculating so much in a grid of orders.
- Lot step (geometric, arithmetic) — worth for Calculation kind.
- Max lot — most allowed lot within the order grid (0 – off).
- ===GRID===
- Pending order — on/off use pending orders.
- Order grid kind — path of the order grid (Restrict or Cease).
- Beginning lot — lot dimension for orders opened from the TR tab.
- Lot multiplier — multiplier for rising the lot of the order grid.
- Step kind — technique for calculating the step (Fastened or ATR).
- Grid step (Fastened) — step dimension (for the Fastened technique).
- Timeframe (ATR) — timeframe for the ATR indicator (for the ATR technique).
- Interval (ATR) — the interval for the ATR indicator (for the ATR technique).
- Coefficient (ATR) — multiplier for the step (for the ATR technique).
- Min grid step (ATR) — the minimal step (for the ATR technique).
- Variety of steps — the variety of steps within the grid.
- Take revenue kind — the kind of take revenue calculation (Aggressive or Conservative, used just for the Restrict grid kind).
- Take revenue (0-off) — take revenue for the grid of orders (in factors, 0 — off).
- Cease loss (0-off) — cease loss for the grid of orders (in factors, 0 — off).
- BreakEven Distance (0-off) — distance for breakeven (in factors, 0 — off).
- BreakEven Revenue — revenue for the breakeven operate (in factors).
- Trailing Begin — distance to start out the trailing cease (in factors).
- Trailing Cease (0-off) — the gap of the trailing cease (in factors, 0-off).
- Makes an attempt to open an order — the variety of makes an attempt to open an order if the earlier try was unsuccessful.
- Magic quantity — order ID.the utility makes use of this quantity to search out its orders.
- Slippage — the utmost allowed worth slippage when opening and shutting an order.
- ===ALL CLOSE===
- Shut revenue — on/off the operate of closing orders on the account when the desired revenue is reached. (for the technique tester)
- Quantity of revenue — the quantity of revenue.
- Shut loss — on/off the operate of closing orders on the account when the desired loss is reached. (for the technique tester)
- Quantity of loss — the quantity of loss.
- ===AUTO TRADE===
- Begin Purchase (For the tester) — activate/off autotrading for Purchase within the technique tester.
- Begin Promote (For the tester) — activate/off autotrading for Promote within the technique tester.
- Begin Time — on/off auto buying and selling from a specified time.
- Begin Time Purchase — begin of auto buying and selling for Purchase.
- Begin Time Promote — begin of auto buying and selling for Promote.
- Cease Time — on/off auto buying and selling till a specified time.
- Cease Time Purchase — time for completion of auto buying and selling for Purchase.
- Cease Time Promote — time for completion of auto buying and selling for Promote.
- Max Worth — on/off most worth for auto buying and selling.
- Max Worth Purchase — most worth for Purchase.
- Max Worth Promote — most worth for Promote.
- Min Worth — on/off minimal worth for auto buying and selling.
- Min Worth Purchase — minimal worth for Purchase.
- Min Worth Promote — minimal worth for Promote.
- Max Positions — on/off disable auto buying and selling after opening a specified variety of positions.
- Max Positions Purchase — most variety of positions for Purchase.
- Max Positions Promote — most variety of positions for Promote.
- ===LEVELS===
- Fashion ranges — the model of the traces that symbolize the grid ranges.
- Coloration energetic purchase ranges — the colour of the energetic Purchase ranges within the grid.
- Coloration inactive purchase ranges — coloration of inactive Purchase ranges within the grid.
- Coloration energetic promote ranges — the colour of energetic Promote ranges within the grid.
- Coloration inactive promote ranges — coloration of inactive Promote ranges within the grid
- Coloration textual content — the colour of the textual content of the degrees.
- ===SOUNDS===
- Sound button — sound for the buttons.
- Sound button person — customized button sound.
- Sound error — sound for errors.
- Sound error person — customized sound for errors.
- ===INTERFACE===
- Buttons market orders on/off — present / cover place opening buttons.
- Buttons pending orders on/off — present / cover buttons for opening pending orders.
- Buttons closing orders on/off — present / cover buttons for closing all orders.
- Present the breakeven stage — present / cover the breakeven stage of the order grid.
- Сolor breakeven line — the colour of the breakeven line.
- Dimension panel — panel dimension. When selecting dimension # 2 or # 3, choose the suitable font dimension for the textual content.
- Font dimension on the panel — the font dimension of the panel textual content.
- Font dimension on the chart — the font dimension of the textual content on the chart.
