Simple Primary Setup for a Commerce Copier Able to Work “Out of the Field”
KopirMT4 and KopirMT5 are commerce copiers for MT4 and MT5 platforms.
Hyperlinks on merchandise
KopirMT4 https://www.mql5.com/ru/market/product/4319?supply=Website+Market+Product+Web page#
KopirMT5 https://www.mql5.com/ru/market/product/40574?supply=Website+Profile+Vendor#
The best setup for copying trades.
Full Listing of Settings
Common Settings — Common Settings
Mode – function of this occasion
Server – operates as a grasp account (sender).
Shopper – operates as a shopper (receiver).
Rule: 1 terminal — 1 copier. Don’t set up it on a number of charts; set up it on any single chart.
Listing of server accounts – checklist of accounts (comma-separated) from which trades are copied (the copier have to be operating in Mode=Server on these accounts).
Time Supervisor — Time Supervisor
Time supervisor use – permits operation in response to terminal (dealer) time.
Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday – time ranges throughout which new trades could also be opened. This setting doesn’t have an effect on closing trades—solely opening new ones. Format: HH:MM-HH:MM. You might also use HH-HH format and specify a number of ranges separated by commas.
HH – hours, MM – minutes.
Instance: 03:25-14:58, 21:50-02:10
Filters Offers — Commerce Filters
Filter magic checklist – filters trades by magic quantity.
This method is very versatile and helps particular symbols:
«-» exclusion mode: disables copying for the required magic quantity.
«*» prefix match: copies trades if the magic quantity begins with the required digits.
Examples:
-123 → copies all magic numbers besides 123.
0,123,345 → copies solely the listed magic numbers; others are ignored.
*123 → copies all magic numbers beginning with 123 (e.g., 123568, 123888, and so forth.).
Manually opened orders have Magic = 0.
Filter symbols checklist – filters by server instrument names.
Utilizing a logo earlier than the instrument identify permits exclusion or actual matching:
«-» – prohibits copying the required instrument.
«!» – requires actual instrument identify match.
Examples:
EURUSD,GBPUSD – copies solely these devices; others are ignored.
-EURUSD – copies all devices besides EURUSD.
!AM – actual match (helpful for CFDs on shares with comparable prefixes).
Various methodology: Maintain solely desired devices in Market Watch, then restart the copier, open its settings, and click on OK.
Filter remark checklist – filters by remark (or a part of it).
Prefixes allow exclusion or actual matching:
«-» – blocks copying trades containing the required remark substring.
«!» – requires actual remark match.
Examples (commerce remark: “Amresling”):
-Amre – blocks all trades with “Amre” within the remark.
!Amresling – permits solely trades with actual remark “Amresling”.
resling – copies all trades containing “resling” within the remark.
Filter minimal lot – minimal server lot allowed for copying. 0 = disabled.
Filter most lot – most server lot allowed for copying. 0 = disabled.
Cross Desk Listing – enhances the exterior cross-mapping file. Used to remap server devices to totally different shopper devices, particularly when names differ fully.
Format: ServerInstrument1=ClientInstrument1, ServerInstrument2=ClientInstrument2
For giant mappings, use exterior file kopirmt_cross.ini (situated in your terminal’s Recordsdata folder).
Instance: XAUUSD=GOLD, EURUSD=GBPCHF
Copy mode – copy path: Lengthy solely, Quick solely, Lengthy & Quick, Copy new off.
Default: Lengthy & Quick.
“Copy new off” disables copying new trades however continues managing current ones.
Copy restrict orders – permits copying of restrict orders.
Copy cease orders – permits copying of cease orders.
MM Settings — Cash Administration Settings
Use stability – permits lot calculation primarily based on Shopper Stability / Server Stability ratio.
Use foreign money – prompts lot recalculation contemplating deposit foreign money. Requires related conversion pair in Market Watch (e.g., USDRUB for RUB accounts, EURUSD for EUR/USD accounts, AUDUSD for AUD accounts).
Use leverage – permits lot adjustment primarily based on Shopper Leverage / Server Leverage ratio.
Use lot multiplicator – lot multiplier. 1 = 100% of server lot. Use 2 to double, 0.5 to halve. All coefficients are utilized cumulatively.
Use repair lot – if enabled (set Use lot multiplicator = 0), overrides all different multipliers with a hard and fast lot measurement.
Minimal lot for open (shopper) – if calculated lot is under this worth, use this lot as an alternative. 0 = disabled.
Maximal lot for open (shopper) – if calculated lot exceeds this worth, use this lot as an alternative. 0 = disabled.
Cease by fairness – fairness threshold (e.g., 500) under which new trades are usually not copied till fairness rises above it.
Cease by margin stage % – free margin proportion threshold under which copying stops. Resumes when margin stage rises above it.
Cease by drawdown % – complete drawdown proportion threshold that halts copying. Resumes when drawdown decreases.
Shut all orders – forcibly closes all open trades if Cease by fairness or Cease by margin stage % circumstances are triggered.
Alert mail use, Alert push use – ship low fairness/margin alerts by way of electronic mail or cell push. Alerts are despatched not more than as soon as each 10 minutes. Terminal notification settings have to be configured accordingly.
Copying Trades Settings — Commerce Copying Settings
Timeout – time window (minutes) to repeat a market order after it opens on the server. 0 = no timeout (waits indefinitely whereas the commerce stays open on server). Doesn’t have an effect on closing.
Timeout for pending orders – time window (minutes) to repeat pending/restrict orders. 0 = copies instantly. Doesn’t have an effect on closing.
Pause for open subsequent order (sec) – delay (seconds) between opening consecutive orders.
Slippage is unfold – calculates entry tolerance as an expansion multiplier. If disabled, makes use of factors.
Filter slippage – entry tolerance as unfold multiplier or in factors.
Reopen place – reopens a commerce at a value near the unique if it was manually closed on the shopper.
Reopen most – most variety of allowed reopens per commerce.
Scalper mode – enters solely at actual or higher value. Might skip trades if value doesn’t return to entry stage. Not appropriate for averaging methods.
Reverse mode – reverses commerce path (e.g., Server BUY → Shopper SELL).
Factors – revenue/loss threshold (in customary factors) triggering commerce copy. Instance: -5 → copies when server commerce reaches -5 factors.
No shut orders on shopper – prevents closing shopper trades after they shut on the server. Partial closing is robotically disabled on this mode.
Rely server order for copy begin – begins copying solely after a specified variety of server orders are open (e.g., begins copying from the fifth order onward).
Auto remark – robotically replaces commerce feedback with server account quantity and copied commerce ID.
Consumer remark – customized remark for all trades. Enter an area (” “) to take away feedback.
Copy stoploss use – permits StopLoss copying.
Copy takeprofit use – permits TakeProfit copying.
Consumer can modify orders – permits guide or EA modification of SL/TP on shopper trades (required if one other EA will handle them). Disables all SL/TP modifications outlined under this feature.
Stoploss Shift (+/- Factors) – adjusts copied StopLoss by specified factors (+ will increase, – decreases).
Takeprofit Shift (+/- Factors) – adjusts copied TakeProfit by specified factors (+ will increase, – decreases).
Consumer takeprofit use – units a hard and fast TakeProfit for all trades.
Consumer take at factors – TakeProfit worth in customary factors.
Consumer stoploss use – units a hard and fast StopLoss for all trades.
Consumer cease at factors – StopLoss worth in customary factors.
Trailing Settings — Commerce Administration Settings
Fairness Tral Begin (%) – prompts trailing cease when revenue reaches this proportion. Closes all chosen group trades if revenue drops under trailing step.
Fairness Tral Step (%) – trailing cease step in proportion.
Trailing All Servers Use – trails all shopper trades collectively or per server individually.
Trailing Cease Factors – basic trailing cease (min 1 level).
Trailing Step Factors – trailing step (min 1 level).
BU Begin Factors – strikes commerce to breakeven after reaching specified revenue (customary factors).
BU Minimal Revenue Factors – minimal revenue (customary factors) required when shifting to breakeven.
FAQ — Regularly Requested Questions
How a lot does it value, and the place can I purchase it?
That is the official retailer. We advocate buying right here to make sure entry to assist and updates.
How do I set up the product within the terminal?
Comply with the overall set up directions supplied after buy. Then configure primary settings utilizing the video information and check performance.
Are updates free?
Sure. All updates for merchandise bought listed here are free and obtainable in your Order historical past. E mail notifications are despatched for brand new variations.
Do I would like to purchase a license for every account?
You may select both Account-bound license or System (VPS) license.
VPS license permits limitless terminals (sometimes 6–10 per customary VPS).
Account license applies solely to shopper accounts.
Notice: All the time match MT4/MT5 model to your slave accounts. Model swaps are usually not supported.
Can I purchase straight from you?
Sure—that is the official retailer. Buying elsewhere dangers shedding entry to assist and updates.
Learn how to copy between MT4 and MT5?
You want each KopirMT4 and KopirMT5. Performance is an identical.
A trial model can function the server.
Limitation: MT4 can not ship/obtain trades to/from MT5 Netting accounts. MT5-to-MT5 helps all account sorts.
The place is the Grasp or Shopper file?
Each modes are in a single file. Set Mode=Server or Mode=Shopper in settings.
What’s the copying velocity?
Velocity is determined by your dealer, not the copier.
The copier detects trades immediately (<50ms delay), however dealer execution might lag.
Examine Terminal Journal for timestamp distinction between order submission and execution.
Check with the 7-day free trial.
Does it work throughout totally different brokers? Can I copy from demo to actual?
Sure—it’s designed for multi-broker and demo-to-real copying.
Totally different instrument names are dealt with robotically or by way of kopirmt_cross.ini.
Demo accounts typically execute sooner than actual accounts—check with the trial model.
Can I attempt it on an actual or demo account?
Sure—the trial model works on any account with full performance for 7 days.
What performance is offered?
Years of improvement allow practically any copying scheme. See full settings checklist on our web site.
Does the copier work over the web?
No—it runs solely on the native machine the place put in.
To repeat remotely: set up a separate terminal with Grasp account (investor password really useful) on the distant PC/VPS to feed information to shoppers.
Can I open trades from my PC/smartphone whereas copying runs on VPS?
Sure—set up all terminals on VPS and commerce from any distant system utilizing the Grasp terminal.
Can I take advantage of the copier with different EAs?
Sure—it coexists with different EAs on Grasp and Shopper accounts with out interfering with their trades.
Set up the copier on a separate chart.
Check with the trial model if not sure.
Trades aren’t copying or different points happen?
Frequent points have identified options. Contact the developer for help.
Totally different instrument names throughout brokers—tips on how to configure?
If names differ solely by prefix (e.g., EURUSD.fx), clear up Market Watch (take away non-trading symbols) and restart the copier.
For fully totally different names (e.g., NASDAQ vs. NAQ100), edit kopirmt_cross.ini on the shopper:
– MT5: MQL5Fileskopirmt_cross.ini
– MT4: MQL4Fileskopirmt_cross.ini
Add mapping strains (no areas round “=”; match case precisely):
XAUUSD=GOLD
XAGUSD=SILVER
USDRUB=USDRUR
NASDAQ=NAQ100
Restart terminal or reload the copier after modifications.
Notice: If devices are mapped by way of Cross Desk, pending orders received’t copy—solely market execution triggers copying.
I discovered model 3.xx, 4.xx, or Lite on-line—it doesn’t work. What ought to I do?
We don’t assist pirated variations. They might include errors risking your funds.
Our official model is inexpensive and contains developer assist and well timed fixes.
Respect builders—keep away from piracy.
I purchased your copier way back—tips on how to get the newest model?
Obtain the trial model and get in touch with us along with your buy particulars. After verification, we’ll activate it to your account or present a reduction coupon.
Is your copier higher than free options on-line?
Free variations typically lack assist, updates, and reliability. Many are deserted or buggy.
We rigorously check each replace and supply free assist to patrons.
Trades are duplicated (2+ an identical orders)?
Use just one chart per terminal for the copier—take away further cases on each Grasp and Shopper.
Copier isn’t copying trades—what to do?
1. Apply primary settings per directions.
2. Guarantee AutoTrading is ON, DLL imports and buying and selling permissions are granted (MT4 requires DLL).
3. Verify your dealer permits EA buying and selling.
4. Examine Specialists Journal for error messages.
5. Confirm all required devices are in Market Watch; add lacking ones and restart terminal.
6. If unresolved, contact assist by way of My Account → Help.
Learn how to disable or change auto-comment?
On the Shopper, modify these settings:
Auto remark = false → disables auto-comments.
Consumer remark = ” “ → removes all feedback (use an area).
