SyncGuard Local Copier &#8211; Complete Setup Guide for Beginners and Advanced Users &#8211; Analytics &#038; Forecasts &#8211;

This information is designed for each inexperienced persons and superior customers.

It applies to each merchandise:

How you can use this information

If you’re new, begin with Fast Begin.
Should you already perceive the fundamentals, go to Enter Information by Part.
In order for you a ready-made configuration thought, go to Really useful Setup Recipes.

1. Platform combos

Use solely the MT5 model for:

Use solely the MT4 model for:

Use each variations for:

In order for you cross-platform copying, each merchandise should be put in on the right terminals.

2. Fast Begin for Learners

Purpose of the primary check

Don’t attempt to configure every little thing directly. The most effective first check is:

one transmitter
one receiver
one image
one very small demo commerce

The principle settings you want first

Mode: TX / RX / BOTH / OFF
Channel ID (should match on TX & RX)
TX ID (distinctive sender title)
RX ID (distinctive receiver title)
Lot mode (Mounted/Mult/Threat/…)
Mounted lot (LotMode=Mounted) or Lot multiplier (LotMode=Multiplier)
Image map: SRC=DST;SRC2=DST2 provided that dealer image names are completely different

For the primary demo check, go away the superior settings at default values.

Step-by-step first setup

Connect the EA to the grasp terminal chart.
Set Mode: TX / RX / BOTH / OFF to TX.
Connect the EA to the receiver terminal chart.
Set Mode: TX / RX / BOTH / OFF to RX.
On each terminals, use the identical Channel ID (should match on TX & RX).
On the grasp terminal, set TX ID (distinctive sender title) to one thing clear, for instance TX1.
On the receiver terminal, set RX ID (distinctive receiver title) to one thing clear, for instance RX1.
On the receiver, set Lot mode (Mounted/Mult/Threat/…) to Mounted.
Then set Mounted lot (LotMode=Mounted) to a small worth corresponding to 0.01.
Preserve Copy SL/TP enabled.
Preserve Auto-recover (auto resync on mismatch) enabled.
Preserve RX snapshot on begin (copy open trades) enabled.
Allow AutoTrading.
Open one small demo commerce on the transmitter terminal.
Affirm that the commerce is copied to the receiver terminal.

Really useful newbie profile

Mode: TX / RX / BOTH / OFF = TX on grasp, RX on receiver
Channel ID (should match on TX & RX) = identical on each terminals
TX ID (distinctive sender title) = TX1
RX ID (distinctive receiver title) = RX1
Lot mode (Mounted/Mult/Threat/…) = Mounted
Mounted lot (LotMode=Mounted) = 0.01
Copy SL/TP = enabled
Auto-recover (auto resync on mismatch) = enabled
RX snapshot on begin (copy open trades) = enabled
RX auto-detect prefix/suffix = enabled

3. Setup by use case

MT5 to MT5

Set up the MT5 product on each MT5 terminals.
Set one terminal to TX.
Set the opposite terminal to RX.
Use the identical Channel ID (should match on TX & RX).
Use a transparent transmitter ID and receiver ID.
Use a easy fastened lot on the receiver for the primary check.
Open one small demo commerce and make sure the copy.

MT4 to MT4

Set up the MT4 product on each MT4 terminals.
Set one terminal to TX.
Set the opposite terminal to RX.
Use the identical Channel ID (should match on TX & RX).
Use a transparent transmitter ID and receiver ID.
Use a small fastened lot on the receiver.
Open one small demo commerce and make sure the copy.

MT5 to MT4

Set up the MT5 product on the MT5 terminal.
Set up the MT4 product on the MT4 terminal.
Set the MT5 terminal to TX.
Set the MT4 terminal to RX.
Use the identical Channel ID (should match on TX & RX).
Verify image names on each brokers.
If image names differ, use Image map: SRC=DST;SRC2=DST2 or prefix/suffix settings.
Use a small fastened lot for the primary check.
Open one demo commerce on the MT5 terminal and make sure the copy on MT4.

MT4 to MT5

Set up the MT4 product on the MT4 terminal.
Set up the MT5 product on the MT5 terminal.
Set the MT4 terminal to TX.
Set the MT5 terminal to RX.
Use the identical Channel ID (should match on TX & RX).
Verify image names on each brokers.
If wanted, configure image mapping.
Use a small fastened lot for the primary check.
Open one demo commerce on the MT4 terminal and make sure the copy on MT5.

One transmitter to a number of receivers

First make one transmitter and one receiver work appropriately.
Add the second receiver solely after the primary receiver is confirmed working.
Use the identical Channel ID (should match on TX & RX) for all terminals in the identical group.
Use one clear transmitter ID on the grasp terminal.
Use a special RX ID (distinctive receiver title) for every receiver, corresponding to RX1, RX2 and RX3.
Configure lot settings individually on every receiver if wanted.
Check every receiver with a small commerce earlier than reside use.

4. What is often copied

market orders
pending orders
order modifications
full closes
partial closes

This makes the copier appropriate for actual day by day use, not solely easy order opening.

5. Enter Information by Part

This part explains the seen enter labels proven within the EA settings window.

How you can learn this part

What it does = the aim of the setting
Use it when = when you could need to change it
Newbie suggestion = the most secure beginning strategy

===== 1) QUICK SETUP =====

That is an important part for first-time customers. Most customers can full the primary profitable check utilizing solely this part.

Mode: TX / RX / BOTH / OFF

What it does: units the position of the terminal.
Use it when: you determine whether or not this terminal ought to ship trades, obtain trades, do each, or keep inactive.
Newbie suggestion: use TX on the grasp terminal and RX on the receiver terminal.

Channel ID (should match on TX & RX)

What it does: defines the native copy channel utilized by the transmitter and receiver.
Use it when: you need to create one copy group or separate a number of copy teams.
Newbie suggestion: use the identical easy channel worth on either side, for instance CH01.

TX ID (distinctive sender title)

What it does: provides the transmitter a transparent id.
Use it when: you need the receiver to comply with a particular grasp clearly.
Newbie suggestion: use a easy worth corresponding to TX1 or MASTER1.

RX ID (distinctive receiver title)

What it does: provides the receiver its personal id.
Use it when: you need to distinguish one receiver from one other, particularly in multi-receiver setups.
Newbie suggestion: use values corresponding to RX1, RX2 and RX3 for various receivers.

Image map: SRC=DST;SRC2=DST2

What it does: maps supply dealer image names to receiver dealer image names.
Use it when: image names are completely different between brokers.
Newbie suggestion: go away empty except symbols are completely different. Instance: EURUSD=EURUSDm;XAUUSD=GOLD.

RX image prefix

What it does: provides a prefix to the receiver image title.
Use it when: the receiver dealer makes use of a typical prefix on many symbols.
Newbie suggestion: go away empty except you already know the dealer makes use of a typical prefix.

RX image suffix

What it does: provides a suffix to the receiver image title.
Use it when: the receiver dealer makes use of a typical suffix corresponding to m or .a.
Newbie suggestion: go away empty except you recognize a suffix is required.

RX auto-detect prefix/suffix

What it does: tries to detect widespread image naming variations routinely.
Use it when: brokers use related names with widespread prefixes or suffixes.
Newbie suggestion: hold enabled.

Lot mode (Mounted/Mult/Threat/…)

What it does: decides how receiver lot measurement is calculated.
Use it when: you need same-size copying, scaled copying, fixed-lot copying or risk-based copying.
Newbie suggestion: begin with Mounted or Multiplier.

Mounted lot (LotMode=Mounted)

What it does: units the receiver lot measurement when lot mode is Mounted.
Use it when: you need a easy, fixed receiver lot measurement no matter transmitter measurement.
Newbie suggestion: begin with 0.01 on demo.

Lot multiplier (LotMode=Multiplier)

What it does: multiplies the transmitter lot measurement by a selected issue.
Use it when: you need the receiver to repeat bigger or smaller heaps proportionally.
Newbie suggestion: begin with a conservative worth corresponding to 0.5 or 1.0.

RX magic quantity (tag copier trades)

What it does: tags receiver-side copier trades with a magic quantity.
Use it when: you need copier trades to be separated from different trades on the receiver account.
Newbie suggestion: go away the default worth except you already use a magic-number workflow.

Copy SL/TP

What it does: copies cease loss and take revenue to the receiver aspect.
Use it when: you need copied trades to incorporate the unique protecting ranges and targets.
Newbie suggestion: hold enabled.

Max unfold (factors, 0=off)

What it does: blocks or delays receiver execution when unfold is simply too excessive.
Use it when: you need further safety throughout dangerous unfold situations.
Newbie suggestion: hold it easy at first; solely set it if you recognize your dealer unfold conduct.

Excessive unfold motion: HOLD/RETRY/SKIP

What it does: defines what the receiver does if unfold is above the allowed restrict.
Use it when: you need safer or stricter execution conduct throughout excessive unfold.
Newbie suggestion: use HOLD.

Reverse route (BUY<->SELL)

What it does: reverses the copied commerce route.
Use it when: you deliberately need opposite-direction copying.
Newbie suggestion: go away disabled.

Pressure resync on begin

What it does: refreshes the receiver state when the EA begins.
Use it when: you need a clear alignment after attaching or restarting.
Newbie suggestion: normally go away at default except you deliberately need a startup refresh.

Auto-recover (auto resync on mismatch)

What it does: permits automated restoration when transmitter and receiver state don’t match.
Use it when: you need the copier to get well extra simply in sensible use.
Newbie suggestion: hold enabled.

RX snapshot on begin (copy open trades)

What it does: permits the receiver to request the present open-state snapshot when it begins.
Use it when: the receiver could connect after the transmitter already has open trades.
Newbie suggestion: hold enabled.

Present on-chart panel

What it does: reveals or hides the panel on the chart.
Use it when: you need a seen standing panel on the chart.
Newbie suggestion: hold enabled should you like visible standing info.

Log degree

What it does: controls how a lot info is written to the journal.
Use it when: you want extra element for troubleshooting.
Newbie suggestion: use a standard info degree for day by day use.

===== 2) TRANSMITTER (TX) =====

This part controls what the transmitter sends out.

TX magic filter

What it does: sends solely trades with a particular magic quantity.
Use it when: you need to copy just one technique from the grasp account.
Newbie suggestion: go away broad or default if you wish to copy all trades.

TX copy guide trades

What it does: contains manually opened trades in copying.
Use it when: you commerce manually on the grasp terminal.
Newbie suggestion: hold enabled if you would like guide trades copied.

TX copy EA trades

What it does: contains EA-opened trades in copying.
Use it when: your grasp account trades are opened by knowledgeable advisors.
Newbie suggestion: hold enabled if you would like EA trades copied.

TX embrace pending orders

What it does: sends pending orders in addition to market orders.
Use it when: you need cease orders and restrict orders copied too.
Newbie suggestion: hold enabled for full sensible copying.

TX remark filter

What it does: sends solely trades whose feedback match particular textual content.
Use it when: you need to isolate one technique by remark.
Newbie suggestion: go away empty except you deliberately want comment-based filtering.

TX ignore copier trades

What it does: prevents the transmitter from re-copying trades created by the copier.
Use it when: you need to keep away from loops and cleaner TX conduct.
Newbie suggestion: hold enabled.

TX snapshot server

What it does: permits the transmitter to serve current-state snapshots to receivers.
Use it when: you need higher late connect, restart alignment and restoration conduct.
Newbie suggestion: hold enabled.

TX publish account information

What it does: makes transmitter account info accessible for scaling and compatibility help.
Use it when: you need proportional copying to work extra easily throughout completely different accounts.
Newbie suggestion: hold enabled.

The remaining TX timing and polling inputs are primarily for superior tuning. Most customers ought to go away them unchanged.

===== 3) RECEIVER (RX) =====

This part controls what the receiver accepts and the way it follows the transmitter.

Auto-apply image map

What it does: applies image mapping routinely when mapping is out there.
Use it when: you need image mapping to work with out guide re-application.
Newbie suggestion: hold enabled.

Permit symbols / Block symbols

What it does: limits copying to chose symbols or blocks undesirable symbols.
Use it when: you need to copy solely sure devices.
Newbie suggestion: go away open at first except you deliberately need image filtering.

Permit magic / Block magic

What it does: filters copied trades by magic quantity on the receiver aspect.
Use it when: you need just some methods to be accepted.
Newbie suggestion: go away broad except you already use magic-based filtering.

Remark embrace / exclude filters

What it does: filters copied trades by remark textual content.
Use it when: you need to permit or block trades by remark naming.
Newbie suggestion: go away empty except you deliberately need remark filtering.

Permit purchase / Permit promote / Permit market / Permit pending

What it does: controls which varieties of commerce actions are allowed on the receiver.
Use it when: you need to block some commerce sorts whereas nonetheless copying others.
Newbie suggestion: go away all enabled for the primary full demo check.

Quick sequential scan

What it does: improves receiver-side occasion processing effectivity.
Use it when: you need regular sensible efficiency.
Newbie suggestion: hold enabled.

TX discovery interval

What it does: controls how typically the receiver seems for accessible transmitters.
Use it when: you need to tune detection frequency.
Newbie suggestion: go away at default.

Skip previous backlog when a brand new TX is discovered

What it does: skips previous backlog when the receiver finds a transmitter late.
Use it when: you need sensible current-state attachment somewhat than replaying previous historical past.
Newbie suggestion: hold enabled.

Request snapshot when a brand new TX is discovered

What it does: requests a contemporary current-state snapshot when a brand new transmitter is detected.
Use it when: you need safer late connect conduct.
Newbie suggestion: hold enabled.

Look ahead to snapshot earlier than following a brand new TX

What it does: makes the receiver look forward to current-state alignment earlier than totally following a newly discovered transmitter.
Use it when: you need a safer connect movement.
Newbie suggestion: hold enabled.

Lacking-event hole coverage

What it does: defines what the receiver ought to do if some anticipated copy occasions are lacking.
Use it when: you need to management whether or not the receiver waits, skips or freezes when there’s a hole.
Newbie suggestion: use the secure snapshot-based choice.

Snapshot request cooldown

What it does: limits how typically the receiver sends snapshot requests.
Use it when: you need to cut back repeated snapshot requests.
Newbie suggestion: go away at default.

Snapshot wait timeout

What it does: defines how lengthy the receiver waits earlier than fallback logic applies.
Use it when: you need to management how strict snapshot ready needs to be.
Newbie suggestion: go away at default.

Permit legacy fallback if snapshot wait occasions out

What it does: permits a suitable fallback restoration path if the popular snapshot path isn’t accessible.
Use it when: you need a extra tolerant operational conduct.
Newbie suggestion: hold enabled.

Request snapshot after auto-recover

What it does: asks for a contemporary snapshot after automated restoration.
Use it when: you need higher re-alignment after restoration.
Newbie suggestion: hold enabled.

Reconcile interval

What it does: controls how typically the receiver reconciles its state with the transmitter.
Use it when: you need to tune how typically consistency checks run.
Newbie suggestion: go away at default.

Copy delay

What it does: delays receiver copying deliberately.
Use it when: you intentionally need delayed execution conduct.
Newbie suggestion: go away unchanged.

Most occasion age

What it does: blocks receiver actions on occasions which are too previous.
Use it when: you don’t want delayed previous actions to execute later.
Newbie suggestion: go away at default except you perceive why you want it.

Use copying expiration / copying expiration time

What it does: expires very previous delayed opening occasions.
Use it when: you need stricter management over stale delayed copies.
Newbie suggestion: go away default except your workflow particularly wants it.

Copying delay

What it does: delays opening actions deliberately.
Use it when: you intentionally need delayed-copy conduct.
Newbie suggestion: go away unchanged.

Higher worth solely

What it does: permits the receiver to open provided that the worth isn’t worse than the transmitter worth.
Use it when: you need stricter price-quality management.
Newbie suggestion: use solely after the fundamental setup is already working properly.

Look ahead to higher worth on open

What it does: holds the open till a greater worth situation is met.
Use it when: you deliberately favor delayed however doubtlessly higher entries.
Newbie suggestion: go away default at first.

Higher worth distinction

What it does: defines the suitable worth distinction for better-price logic.
Use it when: you employ better-price conduct and need to tune it.
Newbie suggestion: go away default except better-price logic is already a part of your plan.

===== 4) LOT / RISK =====

This part controls receiver lot sizing and safety.

Identical-lot adjustment

What it does: provides or subtracts a small offset from same-lot copying.
Use it when: you need almost-the-same lot measurement with a small adjustment.
Newbie suggestion: go away unchanged except you particularly want it.

Per-symbol multiplier map

What it does: applies completely different lot multipliers to completely different symbols.
Use it when: you need one image copied extra conservatively than one other.
Newbie suggestion: go away empty except you want symbol-specific lot management.

Threat %

What it does: defines the account threat proportion for risk-based lot modes.
Use it when: you select a risk-based lot mode.
Newbie suggestion: don’t begin with this except you already perceive risk-based sizing.

Threat cash

What it does: defines a hard and fast cash threat for money-based threat modes.
Use it when: you deliberately need money-risk sizing.
Newbie suggestion: go away unchanged except you employ that particular lot mode.

Reference TX stability

What it does: gives a stability reference for proportional scaling.
Use it when: you need scaling relative to a selected transmitter stability reference.
Newbie suggestion: go away at default except you deliberately use proportional reference logic.

Digital SL factors

What it does: provides risk-based lot modes an assumed stop-loss distance if no actual SL exists.
Use it when: you employ risk-based modes on trades with out precise cease loss values.
Newbie suggestion: go away unchanged except you already use risk-based sizing.

Minimal lot / Most lot

What it does: clamps receiver lot measurement inside a secure vary.
Use it when: you need to shield towards too-small or too-large heaps.
Newbie suggestion: set reasonable limits on your dealer and account.

Most publicity heaps

What it does: limits whole receiver publicity.
Use it when: you need a exhausting cap on copied publicity.
Newbie suggestion: helpful if you would like extra safety.

Most trades per image

What it does: limits what number of receiver trades could exist for one image.
Use it when: you need to forestall too many positions on one instrument.
Newbie suggestion: go away default except you deliberately need this restriction.

Most break up orders

What it does: controls how giant receiver positions could also be break up into a number of orders.
Use it when: giant receiver quantity might have splitting.
Newbie suggestion: go away default.

Netting mode

What it does: controls conduct in MT5 netting-style environments.
Use it when: you’re employed with netting accounts and know which netting conduct you need.
Newbie suggestion: go away at default.

Heaps per 1000

What it does: defines scaling for lot modes based mostly on heaps per 1000 account measurement.
Use it when: you deliberately use that kind of lot mode.
Newbie suggestion: ignore till you want that particular sizing methodology.

Allow forex conversion

What it does: helps when transmitter and receiver accounts use completely different currencies.
Use it when: account currencies differ.
Newbie suggestion: hold enabled.

Per-symbol max unfold map

What it does: units completely different unfold limits for various symbols.
Use it when: you need tighter unfold management on some devices than on others.
Newbie suggestion: go away empty except you want symbol-specific unfold logic.

Most worth deviation

What it does: limits how far execution could drift from the transmitter worth.
Use it when: you need stricter worth management.
Newbie suggestion: go away default except you already perceive the trade-off.

===== 5) EXECUTION =====

This part controls how receiver commerce actions are executed.

Slippage

What it does: defines allowed slippage throughout execution.
Use it when: you need to tighten or loosen execution tolerance.
Newbie suggestion: go away at default except your dealer requires tuning.

Filling mode

What it does: units the order filling conduct on MT5.
Use it when: your dealer requires a particular filling mode.
Newbie suggestion: go away at automated if accessible.

Auto-adjust stops

What it does: adjusts SL and TP if dealer cease or freeze ranges require it.
Use it when: you need smoother compatibility throughout brokers.
Newbie suggestion: hold enabled.

TP multiplier / SL multiplier

What it does: scales copied TP or SL distances.
Use it when: you need wider or tighter copied exits than the unique commerce.
Newbie suggestion: go away default till the fundamental setup is already working.

TP offset / SL offset

What it does: shifts copied TP or SL by a hard and fast variety of factors.
Use it when: you need constant offset changes.
Newbie suggestion: go away default at first.

Shut FIFO

What it does: closes positions in oldest-first order.
Use it when: dealer guidelines or your workflow require FIFO conduct.
Newbie suggestion: go away disabled except you particularly want it.

Shut solely at higher worth

What it does: applies better-price logic to shut operations.
Use it when: you need stricter price-quality management on closes.
Newbie suggestion: go away default at first.

Retry failed actions

What it does: retries commerce actions that fail quickly.
Use it when: you need extra sensible resilience throughout execution issues.
Newbie suggestion: hold enabled.

Retry rely / retry delay / retry interval

What it does: controls how retries are carried out.
Use it when: you need to tune retry conduct for a particular dealer or workflow.
Newbie suggestion: go away at default.

Cease after N trades

What it does: stops the receiver after a selected variety of copied trades.
Use it when: you need limited-duration or limited-count copying classes.
Newbie suggestion: go away disabled except you want this conduct.

Cease after N seconds

What it does: stops the receiver after a selected period of time.
Use it when: you need timed copying classes.
Newbie suggestion: go away disabled except deliberately wanted.

Shut copier trades on cease

What it does: closes receiver-side copier trades when auto-stop is triggered.
Use it when: you need cease conduct to shut copied publicity as properly.
Newbie suggestion: use rigorously.

Auto-stop mode: exhausting skip / tender pause

What it does: defines what cease means operationally.
Use it when: you need cease to behave like a pause or like a strict skip.
Newbie suggestion: tender pause is less complicated to grasp for non permanent stops.

Multi-receiver secure mode

What it does: makes multi-receiver setups safer.
Use it when: one transmitter copies to a couple of receiver.
Newbie suggestion: hold enabled in multi-receiver setups.

Delete processed occasions / transfer processed occasions to accomplished

What it does: controls housekeeping for processed native copier occasions.
Use it when: you deliberately need completely different processed-file dealing with.
Newbie suggestion: go away defaults unchanged.

===== 6) SAFETY / SESSION =====

This part is for defense guidelines and time filters.

Day by day loss restrict / Day by day loss %

What it does: protects the receiver after a selected day by day loss threshold.
Use it when: you need day by day draw back safety.
Newbie suggestion: helpful should you already know your safety limits.

Most drawdown %

What it does: protects the receiver from deeper drawdown.
Use it when: you need a higher-level account safety rule.
Newbie suggestion: use provided that you clearly perceive your required safety threshold.

Day by day revenue goal / Day by day revenue %

What it does: can restrict exercise after a selected revenue goal is reached.
Use it when: you need to pause or management copying after reaching a day by day goal.
Newbie suggestion: optionally available.

Pause on security set off

What it does: pauses the copier when a security rule is triggered.
Use it when: you need a softer security response.
Newbie suggestion: simpler to grasp than aggressive close-all conduct.

Shut all copier trades on security set off

What it does: closes all copier trades when a security rule is triggered.
Use it when: you deliberately need sturdy protecting motion.
Newbie suggestion: use rigorously.

Security cooldown

What it does: prevents security actions from repeating too typically in a brief interval.
Use it when: you need extra steady security conduct.
Newbie suggestion: go away at default.

Allow session filter

What it does: permits copying solely throughout chosen time home windows.
Use it when: you need copying restricted to sure classes.
Newbie suggestion: go away disabled except you deliberately want time filtering.

Allowed weekdays

What it does: controls which weekdays are allowed for copying.
Use it when: you need day-based restrictions.
Newbie suggestion: go away broad except your workflow requires day filtering.

Session time home windows

What it does: defines the allowed time ranges for copying.
Use it when: you need copying energetic solely throughout chosen hours.
Newbie suggestion: go away at default except you deliberately want session-based management.

Apply time filter to open occasions solely or to all occasions

What it does: decides whether or not time filtering impacts solely new opens or all occasion sorts.
Use it when: you need stricter session conduct.
Newbie suggestion: making use of time filtering solely to open occasions is less complicated to grasp.

===== 7) UI / NOTIFY =====

This part controls messages and panel look.

Notify on trades

What it does: sends notifications for profitable copied commerce actions.
Use it when: you need commerce alerts.
Newbie suggestion: optionally available.

Notify on errors

What it does: sends notifications when one thing goes fallacious.
Use it when: you need error alerts.
Newbie suggestion: helpful should you actively monitor the copier.

Push notifications / E mail notifications

What it does: sends alerts by way of MetaTrader push or e mail.
Use it when: these notification channels are already configured correctly in MetaTrader.
Newbie suggestion: use provided that your notification setup is already working.

Notification throttle

What it does: prevents too many notifications from being despatched too shortly.
Use it when: you need to cut back notification spam.
Newbie suggestion: go away at default.

Panel place and colours

What it does: controls the looks and placement of the chart panel.
Use it when: you need a completely different visible format on the chart.
Newbie suggestion: purely optionally available.

===== 8) ADVANCED / DIAGNOSTICS =====

This part is principally for troubleshooting and superior tuning. Most customers ought to go away this part at default values.

Diagnostics mode

What it does: provides extra detailed logs.
Use it when: you’re troubleshooting an issue.
Newbie suggestion: use solely when wanted.

Auto-resync cooldown

What it does: limits how typically automated resync could occur.
Use it when: you need to tune restoration frequency.
Newbie suggestion: go away default.

Days to maintain native recordsdata

What it does: controls how lengthy native copier recordsdata are retained.
Use it when: you need shorter or longer native historical past retention.
Newbie suggestion: go away default.

Timer interval / processing limits / scan batch measurement / protocol model

What it does: controls deeper processing and operational conduct.
Use it when: you already perceive the efficiency or diagnostic cause for altering them.
Newbie suggestion: go away unchanged.

6. Really useful Setup Recipes

Recipe A – Best first demo check

TX on grasp, RX on receiver
Identical Channel ID on each terminals
Clear TX ID and RX ID
Lot mode = Mounted
Mounted lot = 0.01
Copy SL/TP = enabled
Auto-recover = enabled
RX snapshot on begin = enabled
Go away the remainder at default

Recipe B – Identical-size copying

Lot mode = Identical
Non-obligatory same-lot adjustment provided that wanted
Verify minimal lot and most lot values

Recipe C – Smaller receiver measurement

Lot mode = Multiplier
Lot multiplier = for instance 0.5

Recipe D – Mounted receiver lot

Lot mode = Mounted
Mounted lot = for instance 0.01 or 0.02

Recipe E – Completely different dealer image names

Preserve auto-detect prefix/suffix enabled first
If wanted, use Image map
Use prefix or suffix solely when dealer naming is constant

Recipe F – One transmitter to a number of receivers

Use a special RX ID for every receiver
Preserve Multi-receiver secure mode enabled
Check every receiver individually earlier than reside use

Recipe G – Safer unfold dealing with

Set an inexpensive Max unfold
Use Excessive unfold motion = HOLD

7. Frequent newbie errors

Utilizing completely different Channel IDs on transmitter and receiver
Forgetting to allow AutoTrading
Not checking dealer image title variations
Altering superior settings earlier than the primary profitable check
Utilizing lots mode they don’t totally perceive
Utilizing the identical receiver ID for a number of receivers
Attempting reside accounts earlier than finishing a full demo check

8. Full check earlier than reside use

Earlier than transferring to reside accounts, check the next on demo:

Open one market order
Affirm the copied open
Modify cease loss or take revenue
Place one pending order
Modify or delete the pending order
Shut one commerce totally
If doable, check one partial shut

9. Troubleshooting guidelines

Is one terminal set to TX and the opposite to RX?
Do each terminals use the identical Channel ID?
Is AutoTrading enabled?
Are the image names right on the receiver dealer?
Do you want Image map or prefix/suffix settings?
Is the receiver lot measurement allowed by the dealer?
Are you utilizing the right MT4 and MT5 merchandise on your platform mixture?
Did you allow superior settings at default for the primary check?

10. Last recommendation

The copier contains many inputs as a result of it’s designed for each easy and superior workflows. That doesn’t imply you should configure all of them.

The most effective strategy for many customers is: