## Introduction
The AvA-8 buying and selling system is a complete algorithmic buying and selling resolution designed with a number of specialised modules that work collectively or independently to generate buying and selling indicators and handle positions. This guide covers the 4 predominant modules: GAMMA, DELTA, EQUALIZER, and PATHFINDER.
## DELTA Module
### Overview
The DELTA module is designed for development following and primarily executes purchase orders. It makes use of a multi-level entry method with subtle place administration options.
### Key Options
– Multi-level technique with as much as 12 lively buying and selling ranges
– Dynamic lot sizing primarily based on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Appropriate with varied buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Fundamental Settings
– **Buying and selling Mode**: Determines when DELTA will enter the market (tick-based, indicator-based, and so on.)
– **Magic Quantity**: Distinctive identifier for DELTA orders
– **ADX Mode**: Filter energy for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so on.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Fastened tons, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step dimension for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Steadiness, Fairness, Free Margin)
– **Lot Share**: Share of account to make use of when in proportion mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Share)
– **SL Mode**: Cease loss mode (None, Quantity, Share)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step dimension for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Degree Allow**: Toggle for every buying and selling stage
– **Degree Lot Dimension**: Place dimension for particular stage
– **Entry Level**: Distance from earlier stage for entry
– **Take Revenue**: TP goal for the extent
– **TP Comply with**: Whether or not stage’s TP follows increased ranges
### Utilization Suggestions
1. Begin with minimal ranges (1-3) till you perceive the system’s conduct
2. Use ADX filter to commerce solely throughout trending markets
3. For safer entries, allow a number of indicator filters by way of ON_ALL_IND mode
4. Monitor the DELTA panel within the GUI for standing and place info
5. Regulate TP_FOLLOW settings to create a trailing cascade impact throughout ranges
## GAMMA Module
### Overview
The GAMMA module is designed as a counterpart to DELTA, specializing briefly positions. It shares many options with DELTA however is optimized for downward market actions.
### Key Options
– Multi-level technique with as much as 12 lively buying and selling ranges
– Dynamic lot sizing primarily based on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Appropriate with varied buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Fundamental Settings
– **Buying and selling Mode**: Determines when GAMMA will enter the market (tick-based, indicator-based, and so on.)
– **Magic Quantity**: Distinctive identifier for GAMMA orders
– **ADX Mode**: Filter energy for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so on.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Fastened tons, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step dimension for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Steadiness, Fairness, Free Margin)
– **Lot Share**: Share of account to make use of when in proportion mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Share)
– **SL Mode**: Cease loss mode (None, Quantity, Share)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step dimension for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Degree Allow**: Toggle for every buying and selling stage
– **Degree Lot Dimension**: Place dimension for particular stage
– **Entry Level**: Distance from earlier stage for entry
– **Take Revenue**: TP goal for the extent
– **TP Comply with**: Whether or not stage’s TP follows increased ranges
### Utilization Suggestions
1. Use GAMMA along with DELTA for a balanced method to market actions
2. Contemplate enabling GAMMA with stricter filters than DELTA for uneven buying and selling
3. For downtrend affirmation, use the ON_ADX or ON_ALL_IND modes
4. Monitor RSI ranges to keep away from coming into throughout oversold circumstances
5. Use zone filters to enter solely when value is close to provide zones
## EQUALIZER Module
### Overview
The EQUALIZER module is a threat administration system that screens your account metrics and open positions, intervening when mandatory to guard your account from extreme drawdown or opposed market actions.
### Key Options
– Actual-time monitoring of account fairness and drawdown
– Automated detection of development modifications
– Place balancing and hedging capabilities
– Intervention ranges from monitoring-only to full management
– Compatibility with different modules (DELTA, GAMMA)
### Settings
#### Fundamental Settings
– **Equalizer Mode**: Operation mode (OFF, MONITOR, PROTECT, FULL)
– **Monitoring Interval**: How typically to examine metrics (TICK, 1_MIN, 5_MIN, 15_MIN)
– **Fairness Safety Threshold**: Fairness proportion that triggers safety (e.g., 95%)
– **Most Drawdown P.c**: Most allowable drawdown earlier than intervention
– **Allow Counter Trades**: Whether or not to put hedging trades throughout interventions
– **Max Counter Commerce Quantity**: Most quantity for counter/hedge trades
– **Minimal Revenue Goal**: Revenue required earlier than resolving interventions
– **Max Intervention Trades**: Most variety of trades EQUALIZER can place
### Operation Modes
1. **MONITOR (EQUALIZER_MONITOR)**
– Tracks account metrics and module positions
– Gives visible suggestions by means of the dashboard
– No lively intervention
2. **PROTECT (EQUALIZER_PROTECT)**
– Contains all monitoring options
– Takes motion when thresholds are breached
– Closes worst positions when mandatory
– Locations protecting counter trades
3. **FULL (EQUALIZER_FULL)**
– Complete threat administration
– Actively balances publicity between modules
– Locations restoration trades throughout opposed circumstances
– Dynamically adjusts take revenue ranges
– Implements superior hedging methods
### Dashboard Components
– **Fairness Standing**: Present fairness as proportion of steadiness with drawdown
– **Module Exercise**: Lively modules and place counts
– **Web Publicity**: Steadiness between lengthy and quick positions
– **Standing Indicator**: Present operation standing with alerts
### Utilization Suggestions
1. Begin with MONITOR mode to know the system’s evaluation
2. Use PROTECT mode throughout risky durations or when testing new methods
3. FULL mode is greatest for knowledgeable customers who perceive the system completely
4. Set affordable thresholds primarily based in your threat tolerance
5. Monitor the dashboard repeatedly to know intervention patterns
## PATHFINDER Module
### Overview
The PATHFINDER module is the system’s sign technology part, figuring out potential market entry and exit factors primarily based on value motion, shifting averages, and market dynamics.
### Key Options
– Separate uptrend (purchase) and downtrend (promote) modules
– Assist for a number of order ranges
– Customizable take revenue and cease loss ranges
– Sign visualization on chart with arrows and textual content
– ADX development filter integration
– Automated exit on reverse indicators
### Settings
#### Module Management
– **PathFinderBuy_Enabled/PathFinderSell_Enabled**: Allow/disable modules
– **magicNumberPathFinderBuy/magicNumberPathFinderSell**: Distinctive identifiers
– **ExitOnReverseSignal**: Whether or not to shut positions on opposing indicators
#### ADX Filter
– **PathFinderBuy_ADXMode/PathFinderSell_ADXMode**: ADX filter energy
#### Order Settings
– **PathFinderBuy_1_Enabled/PathFinderSell_1_Enabled**: Allow first order stage
– **PathFinderBuy_1_Lots/PathFinderSell_1_Lots**: Place dimension for first stage
– **PathFinderBuy_1_TP/PathFinderSell_1_TP**: Take revenue for first stage
– **PathFinderBuy_1_SL/PathFinderSell_1_SL**: Cease loss for first stage
– **PathFinderBuy_2_Enabled/PathFinderSell_2_Enabled**: Allow second order stage
– **PathFinderBuy_2_Lots/PathFinderSell_2_Lots**: Place dimension for second stage
– **PathFinderBuy_2_TP/PathFinderSell_2_TP**: Take revenue for second stage
– **PathFinderBuy_2_SL/PathFinderSell_2_SL**: Cease loss for second stage
#### Visible Settings
– **ShowHistoricalSignals**: Show previous indicators on chart
– **BuyArrowColor/SellArrowColor**: Colours for sign arrows
– **ArrowSize**: Dimension of sign markers
– **ShowTextLabels**: Show TP stage labels
– **ShowSignalLabels**: Present BUY/SELL textual content on chart
### Sign Technology Logic
PATHFINDER generates indicators primarily based on the connection between value motion and shifting averages:
1. **Purchase Sign Circumstances**:
– Value low MA is above minimal excessive value
– Present shut is above earlier excessive
– Final sign was not a purchase
– ADX filter confirms development (if enabled)
2. **Promote Sign Circumstances**:
– Value excessive MA is beneath most low value
– Present shut is beneath earlier low
– Final sign was a purchase
– ADX filter confirms development (if enabled)
### Utilization Suggestions
1. Use the visible indicators on the chart to know market dynamics
2. Allow ADX filter to cut back false indicators throughout sideways markets
3. Contemplate setting wider cease loss in risky markets
4. Use TP markers to watch revenue targets and regulate guide exits
5. Evaluate historic indicators to know the system’s efficiency over time
## Integration Suggestions for All Modules
1. **Balanced Method**:
– Use DELTA for uptrends and GAMMA for downtrends
– Let EQUALIZER handle general threat
– Use PATHFINDER for sign affirmation
2. **Danger Administration**:
– Begin with small place sizes
– Use EQUALIZER’s safety options
– Set affordable take revenue and cease loss ranges
– Monitor drawdown and fairness metrics
3. **Dashboard Utilization**:
– Watch the ADX panel for development energy
– Test zone panels for help/resistance areas
– Monitor RSI for overbought/oversold circumstances
– Evaluate EQUALIZER standing for account well being
4. **Customization**:
– Adapt settings to your buying and selling fashion and threat tolerance
– Take a look at completely different mixtures of modules
– Contemplate market circumstances when enabling filters
—
